LAKA FOR PARQUET NEOKRON M 2.7L P/MAT

A single-component water-dilutable parquet varnish based on an acrylic-urethane dispersion, intended for varnishing parquet floors in both residential and intensively used public spaces. Creates a glossy wear-resistant coating. Does not emit organic solvents during varnishing and drying. (Not suitable for varnishing parquet from certain maple species and 'diamond pine'). Mix the varnish before use. Dilution is usually not necessary. Clean the surfaces to be varnished from dirt and dust. It is recommended to pre-treat the parquet with the primer varnish NEOKRON SEALER. The varnish NEOKRON itself can also be used for priming. Priming is done with a brush or roller in 1 coat or with a special steel spatula for varnishing in 2-3 coats.  After applying the primer, sanding should be done. The drying time before sanding should be no less than 6 hours. When priming with a special steel spatula for varnishing, sanding is usually not necessary. Apply 2-3 coats of varnish (not including the primer coat). Application should be done in even layers, avoiding local accumulation of varnish. The interlayer waiting time should be no less than 5 hours. The drying time before free movement can commence is 6 hours. At lower temperatures, the drying time increases. Complete curing of the varnish occurs within 1 week of application. Installation of carpets, placement of furniture, wet cleaning, and application of protective wax are permitted no earlier than 1 week after application. The temperature of the air and the surface being varnished should be no less than +10°C. Relative humidity should not exceed 80%. During the application of varnish, avoid direct sunlight and drafts. For cleaning tools, use water. Dried varnish residues can be cleaned with acetone or solvent 646.