IMPREGN. WOOD SHADE CEDAR RED 1L OKKO

Name: IMPREGN. WOOD SHADE CEDAR RED 1L OKKO
Brand: Buvmix
SKU: 501764213
Price: 1.88 EUR
Availability: InStock

Product code: 501764213

€1,⁸⁸

Pieejams uzreiz

Write a review More about the product

Product information

Apdares darbiem	Iekštelpu un āra
Iepakojuma daudzums, l	1
Krāsa	Sarkana krās.
Produkta veids	Koksnes impregnants
Zīmols	Okko
Kolekcija	Wood Shade
Atšķaidītājs	Ūdens
Krāsas nosaukums	Sarkanais ciedrs krās.
Patēriņš	14-18 m²/l
Īpašības	Virsmai jābūt sausai un tīrai. Rūpīgi notīriet putekļus, netīrumus, taukus vai citus traipus. Pirms lietošanas labi samaisa. Ieteicams uzklāt ar otu vai rullīti 1-2 reizes, neatstājot nesegtu koksni. Otro slāni uzklāj tikai pēc tam, kad pirmais ir pilnībā izžuvis. Impregnētai koksnei jābūt sausai (mitrums - mazāks par 15%).
Izmantošana	Koka virsmu impregnēšanai, piešķirot tām vēlamo krāsu, dekoratīvo izskatu un aizsardzību pret laikapstākļu iedarbību. Sastāvā esošais vasks un citas piedevas novērš ūdens uzsūkšanos, padara koksni izturīgu pret saules stariem un aptur koksnes dabisko novecošanos un pūšanu.
Pilnīgi sausa pēc	12 - 24 h
Žūšanas laiks (pirms pieskaršanās)	2 h
Izcelsmes valsts	Lietuva
Obligātā garantija	24 mēn
Barcode	501764213

The wood impregnation agent "Wood Shade" is designed for the decoration and protection of wood from atmospheric effects. Wax and other added components prevent the wood from absorbing water, make it resistant to sunlight, and halt the natural aging and decay of the wood.

Purpose of Use

For impregnating wooden surfaces (e.g., fences, firewood storage, decorative walls, environmental decoration elements, outdoor canopies, and the like), providing the desired color. It is recommended to cover horizontal surfaces of outdoor furniture with varnish. New surfaces should be impregnated while the wood has not darkened due to atmospheric exposure. Surface preparation. The surface must be dry and clean. Dust, resins, fats, or other stains must be thoroughly cleaned. Usage. Stir thoroughly before use. It is recommended to apply with a brush or roller 1-2 times, without leaving untreated wood. The second coat should only be applied when the first is completely dry.

Working Conditions

Use when the ambient temperature is between +6 and +25 °C. The recommended working temperature is 18 (+-5 °C). The impregnated wood must be dry (moisture – less than 15 percent). High humidity negatively affects the quality of impregnation.

Drying Time. Does not stick upon touch after 2 hours (if the air temperature is +20 °C and relative humidity is 65 percent). Fully dries after 12-24 hours. Coverage. Approximately 14-18 m2/l (depending on the preparation of the wood surface).