HAMMERITE WHITE GLOSS PAINT 250ML

Protective paint for metal that creates a smooth, highly glossy finish, providing long-lasting resistance to rust, impact, and scratches; the “3 in 1” product is also suitable for wood and plastic surfaces.

• Can be applied directly to rusty surfaces
• No primer and undercoat usually needed
• Provides long-lasting corrosion protection
• Forms a very dense moisture-resistant layer on metal surfaces both indoors and outdoors

Applications

• Paint for metal

Protective paint for metal, smooth surface (Smooth) is suitable for the following surfaces:

• Garage doors
• Metal doors
• Metal stairs
• Fences
• Radiators
• Garden furniture

APPLICATION AND CARE RECOMMENDATIONS
• The paint must be thoroughly mixed before use.
• When painting with a brush, the paint should not be thinned; when using a roller, thinner can be added up to 10% of the volume; when using a low or high-pressure sprayer, thinner can be added up to 15% of the volume; use HAMMERITE thinner (Brush Cleaner & Thinner) for dilution.
• To ensure even painting without color differences, mix a sufficient amount of paint in the container.
• When painting with a brush or roller, apply 2 coats; when using a high-pressure sprayer, apply 2–3 coats; when using a low-pressure sprayer, apply 3–4 coats.
• The required air and surface temperature during painting and while the paint dries is +5…35 °C (recommended +18±2 °C), with relative humidity <80%. Avoid painting in windy conditions and in direct sunlight, as excessive solvent evaporation can lead to uneven and poor-quality paint film.
• For cleaning contaminated surfaces during operation, use clean water, as well as neutral or weakly alkaline cleaning agents (pH < 8). After using a cleaning agent, the surface should be thoroughly rinsed with clean water, as prolonged alkaline exposure can make the painted surface matte. Higher water temperatures accelerate surface cleaning. Use a soft brush or sponge as a working tool. Avoid using strongly alkaline cleaning agents.