Product information
| Krāsas tips | Emalja |
|---|---|
| Emaljas tips | Pret-korozija |
| Krāsas tonis | Brūna krās. |
| Spīdums | Spīdīga |
| Apdares darbiem | Iekštelpu un āra |
| Produkta veids | Emaljas krāsa |
| Zīmols | Hammerite |
| Kolekcija | Smooth |
| Iepakojuma daudzums, l | 0.25 |
| Krāsas nosaukums | Tumši brūna krās. |
| Atšķaidītājs | Hammerite (Brush Cleaner & Thinner)/( Otu tīrītājs un krāsas šķīdinātājs) |
| Krāsas funkcija | Aizsargā metāla konstrukcijas pret koroziju |
| Patēriņš | 5 m²/l |
| Darbarīki | Ota, Smidzināšanas uzgalis, Veltnis |
| Piemērots karstas iedarbības virsmām | Nē |
| Pilnīgi sausa pēc | 4 h |
| Īpašības | Var krāsot uz sarūsējušām virsmām, nodrošina ilgstošu aizsardzību pret rūsu, ātri žūst. |
| Izcelsmes valsts | Polija |
| Barcode | 500553045 |
Hammerite Anti-Corrosion Enamel Metal Paint Smooth
A protective paint for metal that provides a smooth, highly glossy finish, offering long-lasting resistance to rust, impacts, and scratches. The "3 in 1" product is also suitable for wood and plastic surfaces.
- Can be applied directly to rusty surfaces
- Primer and undercoat are usually not needed
- Provides long-lasting protection against corrosion
- Forms a particularly hermetic, waterproof layer on metal surfaces for both indoor and outdoor use
Applications
- Paint for metal
The metal protective paint, smooth surface (Smooth) is suitable for the following surfaces:
- Garage doors
- Metal doors
- Metal stairs
- Fences
- Radiators
- Garden furniture
SURFACE PAINTING AND CARE RECOMMENDATIONS
• The paint must be stirred thoroughly before use.
• When painting with a brush, the paint should not be diluted; when using a roller, up to 10% thinner may be added; when using a low-pressure or high-pressure spray gun, up to 15% thinner may be added; HAMMERITE thinner (Brush Cleaner & Thinner) should be used for dilution.
• To ensure even painting without color differences, a sufficient quantity of paint must be mixed in the containers.
• When painting with a brush or roller, the surface should be covered in 2 coats; when using a high-pressure spray gun, the surface should be covered in 2-3 coats, and when using a low-pressure spray gun – in 3-4 coats.
• During application and drying, the air and surface temperature must be +5…35 °C (recommended temperature +18±2 °C), with relative humidity below 80%. Avoid painting in windy weather and direct sunlight, as excessive solvent evaporation can cause an uneven and poor-quality paint film.
• During operation, dirty surfaces should be cleaned with clean water and neutral or weakly alkaline detergents (pH < 8). After using a cleaner, the surface should be rinsed thoroughly with water, as prolonged exposure to alkalis on the painted surface can make it dull. Higher water temperatures accelerate surface cleaning. Use a soft brush or sponge as a tool. Avoid using strong alkaline cleaners.
Reviews
There are no reviews yet. Be the first!
Write a review
Write a review for: HAMMERITE COLOR T. BROWN GLOSS 250ML
