WALLPAPER ADHESIVE FLIZELIN 205G

Instructions for use:

1. Surface preparation. The surface to be glued must be clean and dry. Old wallpaper must be completely removed from the surfaces to be glued. Smooth and lacquered surfaces should be treated with sandpaper. The area affected by mold should be washed with the fungicidal liquid “Fungi”. For priming the surface, use the prepared wallpaper glue. Before applying wallpaper, allow the primed surface covered with glue to dry completely.
2. Mixing. Pour the contents of the box into water and mix quickly until the mixture is completely combined. Leave it for 6 minutes and then mix thoroughly again. The glue is ready for use.
3. Gluing. When gluing wallpaper, follow the instructions of the wallpaper manufacturer. Apply the wallpaper glue with a paint roller or large brush directly onto the surface to be glued. Apply glue the width of the wallpaper sheet or slightly more. Be careful not to let glue drip onto the front of the wallpaper, but if it happens, clean the glue stains with a damp sponge. Painting on wallpaper should be done no earlier than 24 hours later. Wash tools with water.

Health and safety information:

P102 Keep out of reach of children.

Consistency: in flake form

Expiration date: indefinite

Surface priming: 10 liters.

Smooth wallpaper: Cold water per packaging - 5 liters. Covered area m²/rolls - 40 m².

Relief wallpaper: Cold water per packaging - 4 liters. Covered area m²/rolls - 35 m².