NUOVAMAT PAINT 3.6L

Specially abrasion-resistant, easy-to-clean deep matte acrylic water-dispersible paint. The formula of this paint has been developed using modern technology, resulting in a unique property complex. NUOVAMAT contains specially hard fillers based on ceramics and glass, which provide the surface with exceptionally high resistance to both dry and wet abrasion.

PREPARING THE PAINT FOR USE:

Mix thoroughly before use. If necessary, dilute with water to the working viscosity.

PREPARING THE SURFACE:

Remove dust, dirt, chalk, previously painted adhesive paint, or any peeled old paint of a different type. Surfaces painted with oil or alkyd paints should be treated with sandpaper until a slight matte finish is achieved.

PRIMING THE SURFACE:

It is recommended to prime porous plaster and concrete surfaces with MOVILAT BASE, FORAKRIL BASE, AKROPRIM, or with the NUOVAMAT paint itself, pre-diluted with water up to 15% of the paint volume.

PAINTING:

Apply in 2 coats. The air and painting surface temperature should be no lower than +5 ºC and no higher than +30 ºC. Drying time at 20ºC temperature: 1 hour. Consumption: 8÷12 m²/l for one coat.

CLEANING TOOLS:

Use water for cleaning tools.

MAINTAINING THE SURFACE:

It is advisable to start cleaning the surface no earlier than 1 week after application. Cleaning can be done with a cloth or sponge dampened with clean water or a mildly alkaline cleaning agent. At the end, it is recommended to wipe the surface with a sponge dampened with clean water.

SHELF LIFE:

36 months in a tightly sealed manufacturer's container at temperatures above +5ºC.