IMPREG. WOOD SHADE CEDAR RED 5L OKKO

Name: IMPREG. WOOD SHADE CEDAR RED 5L OKKO
Brand: Buvmix
SKU: 501764214
Price: 7.79 EUR
Availability: InStock

Product code: 501764214

€7,⁷⁹

Pieejams uzreiz

Write a review More about the product

Product information

Apdares darbiem	Iekštelpu un āra
Iepakojuma daudzums, l	5
Krāsa	Sarkana krās.
Produkta veids	Koksnes impregnants
Zīmols	Okko
Kolekcija	Wood Shade
Atšķaidītājs	Ūdens
Krāsas nosaukums	Sarkanais ciedrs krās.
Patēriņš	14-18 m²/l
Īpašības	Virsmai jābūt sausai un tīrai. Rūpīgi notīriet putekļus, netīrumus, taukus vai citus traipus. Pirms lietošanas labi samaisa. Ieteicams uzklāt ar otu vai rullīti 1-2 reizes, neatstājot nesegtu koksni. Otro slāni uzklāj tikai pēc tam, kad pirmais ir pilnībā izžuvis. Impregnētai koksnei jābūt sausai (mitrums - mazāks par 15%).
Izmantošana	Koka virsmu impregnēšanai, piešķirot tām vēlamo krāsu, dekoratīvo izskatu un aizsardzību pret laikapstākļu iedarbību. Sastāvā esošais vasks un citas piedevas novērš ūdens uzsūkšanos, padara koksni izturīgu pret saules stariem un aptur koksnes dabisko novecošanos un pūšanu.
Pilnīgi sausa pēc	12 - 24 h
Žūšanas laiks (pirms pieskaršanās)	2 h
Izcelsmes valsts	Lietuva
Obligātā garantija	24 mēn
Barcode	501764214

The wood impregnation agent "Wood Shade" is intended for the finishing and protection of wood from atmospheric effects. Thanks to wax and other additives, the wood does not absorb water, becomes resistant to sunlight, and natural aging and rot of the wood is prevented.

Field of Application

For the impregnation of wooden surfaces (such as fences, firewood storages, decorative wells, surrounding finishing elements, country sheds, etc.), providing the desired color. When using on outdoor furniture, it is recommended to coat horizontal surfaces with varnish. New surfaces should be impregnated before the wood darkens due to atmospheric exposure. Surface preparation. The surface must be dry and clean. Dust, resins, fats, or other stains must be thoroughly cleaned. Usage. Shake well before use. It is recommended to apply with a brush or roller 1-2 times, leaving no untreated wood. The second layer should be applied only after the first has completely dried.

Working Conditions

Use when the ambient temperature is between +6 and +25 °C. The recommended working temperature is 18 (+-5 °C). The impregnated wood must be dry (moisture - less than 15 percent). High air humidity negatively affects the quality of impregnation.

Drying time. It does not stick upon touch after 2 hours (if the air temperature is +20 °C and relative humidity is 65 percent). Fully dries after 12-24 hours. Coverage. Approximately 14-18 m²/l (depending on the preparation of the wood surface)